Skip to content

Radians and Degrees: How to Convert Between Them

Radians to degrees: π radians = 180°, so multiply by 180/π; 1 radian is about 57.3°
Trigonometry7 min readStarter to Challenger

To change radians to degrees, multiply by 180/π. To change degrees to radians, multiply by π/180. Both rules come from one fact: π radians = 180°, half a turn. One radian is the angle whose arc is as long as the radius, about 57.3°.

π radians = 180°

degrees = radians × 180/π
radians = degrees × π/180

When the arc equals the radius, the angle is 1 radian.
Starter

Hello, curious mind!

What is a radian?

A radian measures an angle by the arc it cuts off. Draw a circle. Take an arc exactly as long as the radius. The angle at the centre is 1 radian.

How many radians make a full turn? The whole edge of a circle is 2πr long. That is 2π lengths of r. So a full turn is 2π radians, and half a turn is π radians.

  • Full turn: 360° = 2π radians.
  • Half turn: 180° = π radians.
  • 1 radian = 180/π ≈ 57.2958°.
  • 1 degree = π/180 ≈ 0.01745 radians.

A radian does not depend on the size of the circle. A bigger circle has a longer arc and a longer radius, so the ratio stays the same.

Remember this

π on its own is a number, about 3.14. π radians is an angle: 180°.

Starter

How to convert radians to degrees, and back

Multiply by a fraction that equals 1. Since π radians = 180°, the fraction 180°/π rad is 1 whole. Pick the version that cancels the unit you have.

  1. Radians to degrees: multiply by 180/π. The π usually cancels.
  2. Degrees to radians: multiply by π/180. Simplify the fraction and keep π in the answer.
DegreesRadiansDegreesRadians
30°π/6135°3π/4
45°π/4150°5π/6
60°π/3180°π
90°π/2270°3π/2
120°2π/3360°2π

Check any row: the degrees divided by 180 give the number in front of π. For 135°, 135 ÷ 180 = 3/4.

Explorer

Radians to degrees: 4 worked examples

Example 1: degrees to radians

Write 252° in radians.

  1. Multiply by π/180: 252 × π/180 = 252π/180.

  2. Divide top and bottom by 36: 252 ÷ 36 = 7 and 180 ÷ 36 = 5.

  3. 252° = 7π/5 radians.

Example 2: radians with π to degrees

Write 5π/9 radians in degrees.

  1. Multiply by 180/π. The π cancels: 5/9 × 180.

  2. 180 ÷ 9 = 20, and 5 × 20 = 100.

  3. 5π/9 = 100°.

Example 3: radians with no π

Write 2.5 radians in degrees.

  1. Nothing cancels, so use π itself: 2.5 × 180 ÷ π = 450 ÷ π.

  2. Keep the full value of π on the calculator.

  3. 2.5 rad ≈ 143.24°. With π = 3.14 you get 143.31°, which is off by 0.07°.

Example 4: more than a full turn

Where does an angle of 17π/6 radians end?

  1. 17/6 × 180 = 510°.

  2. Take away a full turn: 510° − 360° = 150°.

  3. 17π/6 ends in the same place as 150°, or 5π/6. In radians, take away 2π = 12π/6.

Explorer

Why maths uses radians

With radians, circle formulas lose their 360s. For an angle θ in radians:

  • Arc length: s = rθ.
  • Sector area: A = ½r²θ.
  • Turning speed: radians per second = turns per minute × 2π ÷ 60.

A car wiper (made-up numbers)

A wiper blade tip is 45 cm from the pivot. It sweeps through 2.2 radians. The tip travels s = 45 × 2.2 = 99 cm. The area swept by the full arm is ½ × 45² × 2.2 = 2,227.5 cm². In degrees, 2.2 rad is about 126°.

A spinning wheel

A wheel turns at 1,200 turns a minute. That is 1,200 × 2π ÷ 60 = 40π ≈ 125.7 radians a second.

Calculus needs radians too. For small angles in radians, sin x is close to x: sin 0.1 ≈ 0.0998. That is why the rule “the derivative of sin x is cos x” works only in radians. See where calculus starts.

Explorer

Common mistakes with radians and degrees

  1. The fraction upside down. Going to degrees? 180 goes on top. A quick size check helps: degrees are always the bigger number.
  2. π = 180. π radians = 180°. But π alone is about 3.14, so 2π is not 360 as a number.
  3. Degrees in s = rθ. With θ = 126°, you get 45 × 126 = 5,670 cm, not 99 cm.
  4. Calculator mode. sin 90 gives 1 in degrees but about 0.894 in radians. In Desmos, set the mode in the settings.
  5. Rounding π early. Keep π to the last step.
  6. A flipped fraction. 7π/5 is 252°, but 5π/7 is about 128.6°.

Check this with the Free BMI Maths Test

  • Multiplies 252° by 180/π and gets about 14,439: CNC, concept not clear.
  • Writes π = 180 as if π were a number of degrees: CNC, concept not clear.
  • Uses s = rθ with θ in degrees: CNC, concept not clear.
  • Leaves the calculator in the wrong mode: DRC, did not read carefully.
  • Uses π = 3.14 too early: 143.31° in place of 143.24°: CMT, calculation mistake.
  • Copies 7π/5 as 5π/7: CWV, copied a wrong value.

The Free BMI Maths Test finds which of the 6 mistake types your child makes, and their real maths level. About the Free BMI Maths Test

BMI = Bureau of Math Investigation

Challenger

Test prep corner

Radians and degrees in SAT and JEE Main maths

College Board’s SAT framework lists converting between degrees and radians under Circles. The SAT reference sheet says a circle has 360 degrees, or 2π radians, of arc. In JEE Main, trigonometry and calculus questions often give angles in radians. These are SAT-style and JEE-style questions.

SAT-style: An angle measures 3π/5 radians. What is its measure in degrees?

3/5 × 180 = 108. Trap: 54 uses 2π = 180°.

JEE-style: What is the angle between the hour hand and the minute hand of a clock at 4:20, in radians? (A) π/18 (B) π/9 (C) π/6 (D) 0

The minute hand is at 20 × 6° = 120°. The hour hand moves 0.5° a minute, so it is at 4 × 30° + 20 × 0.5° = 130°. The gap is 10° = 10 × π/180 = π/18, answer (A). Trap: (D) forgets that the hour hand moves.

For exact trig values at these angles, see the unit circle. More practice: our SAT-style maths practice questions.

Facts checked on 14 November 2026 on satsuite.collegeboard.org.

Explorer

Quick check: 5 radians and degrees questions

1. π radians is the same angle as:

Yes! Half a turn.

Not quite. That is 2π radians.

Not quite. π is about 3.14, but π radians is 180°.

2. What is 210° in radians?

Not quite. 210 ÷ 180 is 7/6, not 7/3.

Yes! 210/180 = 7/6.

Not quite. The fraction is upside down.

3. What is 4π/3 radians in degrees?

Not quite. That is 2π/3.

Not quite. That is 3π/2.

Yes! 4/3 × 180 = 240.

4. About how many degrees is 1 radian?

Yes! 180 ÷ π ≈ 57.3.

Not quite. A radian is much bigger than a degree.

Not quite. That is π radians.

5. A circle has radius 6 cm. A central angle of 1.5 radians cuts off an arc. How long is the arc?

Not quite. That is the sector area, ½r²θ, in cm².

Yes! s = rθ = 6 × 1.5.

Not quite. That is 6 ÷ 1.5.

Got 2 or fewer right? Book the Free BMI Maths Test to find the cause.

Questions people ask about radians and degrees

How do you convert radians to degrees?

Multiply by 180/π. For example, 5π/9 × 180/π = 100°.

How do you convert degrees to radians?

Multiply by π/180 and simplify. For example, 252° × π/180 = 7π/5.

How many degrees is 1 radian?

180 ÷ π, which is about 57.3°.

Does your child mix up radians and degrees?

The Free BMI Maths Test finds your child’s real maths level and the reason for each mistake.

BMI = Bureau of Math Investigation

Written by Himanshu Jain

B.Tech, IIT Delhi. Founder of Math Quotient.

WhatsApp us